V6 Backlight for Game Boy DMG and Pocket

Variable Clock V4

$23.98

Quick View {"id":864058540147,"title":"Variable Clock V4","handle":"variable-clock-v4","description":"\u003cdiv\u003eThis is a variable clock output device.\u003c\/div\u003e\n\u003cdiv\u003eYou can manipulate the speed of the Game Boy processor on the fly with a potentiometer. \u003c\/div\u003e\n\u003cdiv\u003eThe pitch of the sound will become lower as you slow it down and it will become higher when you speed it up. \u003c\/div\u003e\n\u003cdiv\u003eYou can make some incredible sounds with this kit as well as adding a whole new way to play games!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eBuilt in features: \u003c\/div\u003e\n\u003cdiv\u003e-On\/off push button switch: \u003c\/div\u003e\n\u003cdiv\u003eNo need to get a separate switch for this kit. It is built right into the PCB!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Panel mounting: \u003c\/div\u003e\n\u003cdiv\u003eThis kit should be mounted directly the Game Boy case with the provided screws and spacer.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-High limiter: \u003c\/div\u003e\n\u003cdiv\u003eThis will limit how fast it will go. Many devices will crash if pushed too far. \u003c\/div\u003e\n\u003cdiv\u003eA 10K SMD resistor is pre-soldered for installation into an Original Game Boy(DMG) or Game Boy Pocket(MGB). \u003c\/div\u003e\n\u003cdiv\u003eIt can easily be removed with a razor blade and you may install a different through hole resistor(an 8K resistor is ideal for the Game Boy Color(CGB).\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Low Limiter: With a 100k-500K pot(higher resistance = lower speed and pitch) this kit will go so slow and low that the LCD will not be visible and the notes will sound like a droning \"growl\"(this can actually be a very awesome effect for music). The VCv4.5 comes with a 200K trim pot pre-installed. This will allow you to set the low limit before you install the kit or you can install it at the top or side of an Original Game Boy(DMG) and the low limiter can be accessed through a small hole with a screw driver so that it can be adjusted on the fly. Check out this video for a demonstration of how this feature works: \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation instructions are in the last picture. \u003c\/div\u003e\n\u003cdiv\u003eSave the image for higher quality.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe assembled V4.5 PCB and components measures approximately 1 1\/4\"(25mm) long x 3\/8\"(9mm) wide x 1\/4\"(7mm) thick.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe width=\"320\" height=\"190\" src=\"\/\/www.youtube.com\/embed\/gHV7cbHpcSU\" frameborder=\"0\" allowfullscreen=\"\" style=\"border-width: 0px; border-style: initial; font-family: 'Open Sans'; font-size: 15px; font-stretch: inherit; line-height: 24px; vertical-align: baseline; margin: 0px; padding: 0px; color: #ffffff; background-color: #33cccc;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2018-05-28T15:51:55-05:00","created_at":"2018-05-28T15:51:56-05:00","vendor":"Nonfinite Electronics","type":"","tags":[],"price":2398,"price_min":2398,"price_max":2398,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536794951795,"title":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","option1":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","option2":null,"option3":null,"sku":"v4variableclock-yes-please-i-need-one-to-open-my-game-boy-1-off-original-price-orig-299-each","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Variable Clock V4 - Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","public_title":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","options":["Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)"],"price":2398,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/VCfamilyv4-1.jpg?v=1527540716","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/VCv4.5_installation_guide.jpg?v=1527540716","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/VCv4-01.jpg?v=1527540716"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/VCfamilyv4-1.jpg?v=1527540716","options":["Add a Tri-Wing Screwdriver"],"content":"\u003cdiv\u003eThis is a variable clock output device.\u003c\/div\u003e\n\u003cdiv\u003eYou can manipulate the speed of the Game Boy processor on the fly with a potentiometer. \u003c\/div\u003e\n\u003cdiv\u003eThe pitch of the sound will become lower as you slow it down and it will become higher when you speed it up. \u003c\/div\u003e\n\u003cdiv\u003eYou can make some incredible sounds with this kit as well as adding a whole new way to play games!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eBuilt in features: \u003c\/div\u003e\n\u003cdiv\u003e-On\/off push button switch: \u003c\/div\u003e\n\u003cdiv\u003eNo need to get a separate switch for this kit. It is built right into the PCB!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Panel mounting: \u003c\/div\u003e\n\u003cdiv\u003eThis kit should be mounted directly the Game Boy case with the provided screws and spacer.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-High limiter: \u003c\/div\u003e\n\u003cdiv\u003eThis will limit how fast it will go. Many devices will crash if pushed too far. \u003c\/div\u003e\n\u003cdiv\u003eA 10K SMD resistor is pre-soldered for installation into an Original Game Boy(DMG) or Game Boy Pocket(MGB). \u003c\/div\u003e\n\u003cdiv\u003eIt can easily be removed with a razor blade and you may install a different through hole resistor(an 8K resistor is ideal for the Game Boy Color(CGB).\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Low Limiter: With a 100k-500K pot(higher resistance = lower speed and pitch) this kit will go so slow and low that the LCD will not be visible and the notes will sound like a droning \"growl\"(this can actually be a very awesome effect for music). The VCv4.5 comes with a 200K trim pot pre-installed. This will allow you to set the low limit before you install the kit or you can install it at the top or side of an Original Game Boy(DMG) and the low limiter can be accessed through a small hole with a screw driver so that it can be adjusted on the fly. Check out this video for a demonstration of how this feature works: \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation instructions are in the last picture. \u003c\/div\u003e\n\u003cdiv\u003eSave the image for higher quality.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe assembled V4.5 PCB and components measures approximately 1 1\/4\"(25mm) long x 3\/8\"(9mm) wide x 1\/4\"(7mm) thick.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe width=\"320\" height=\"190\" src=\"\/\/www.youtube.com\/embed\/gHV7cbHpcSU\" frameborder=\"0\" allowfullscreen=\"\" style=\"border-width: 0px; border-style: initial; font-family: 'Open Sans'; font-size: 15px; font-stretch: inherit; line-height: 24px; vertical-align: baseline; margin: 0px; padding: 0px; color: #ffffff; background-color: #33cccc;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}

Non-adhesive polarized film

$4.99

Quick View {"id":864056377459,"title":"Non-adhesive polarized film","handle":"non-adhesive-polarized-film","description":"\u003cp\u003eThis handy little square of polarized film will drastically improve your backlit DMG. Instead of having to painstakingly peel the foil backing off of the old film, then having to deal with either removing the adhesive or having your finished product look unprofessional, you can simply tear everything off and replace it with this! It makes what is arguably the hardest part of backlighting your DMG extremely easy and practically fool proof.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe film is non-adhesive, meaning you won't have to worry about air bubbles when placing it behind the LCD, either.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe film is neutral grey, meaning your backlight will look extremely crisp, and, even more, these were specifically cut to 2\" squares (instead of 2\" x 1.875\", the actual size of your LCD,) so you can rotate the film 90 degrees to invert your LCD!\u003cbr\u003e\r\n\u003cbr\u003e\r\nWant to purchase everything you need for backlighting in one simple kit? Go\u003ca href=\"http:\/\/www.nonelectronics.com\/catalog\/index.php?main_page=product_info\u0026amp;cPath=10\u0026amp;products_id=87\"\u003e here\u003c\/a\u003e.\u003c\/p\u003e\r\n","published_at":"2018-05-28T15:51:22-05:00","created_at":"2018-05-28T15:51:24-05:00","vendor":"Nonfinite Electronics","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536772800627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"POLARIZEDFILM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Non-adhesive polarized film","public_title":null,"options":["Default Title"],"price":499,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/2x2_20LCD_20quality_20non-adhesive_20polarized_20film_20_28for_20backlighting_29.jpg?v=1527540684","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/2x2_20LCD_20quality_20non-adhesive_20polarized_20film_20_28for_20backlighting_29_3519402c-2217-4f66-90bb-095a31a8eeb8.jpg?v=1527540684"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/2x2_20LCD_20quality_20non-adhesive_20polarized_20film_20_28for_20backlighting_29.jpg?v=1527540684","options":["Title"],"content":"\u003cp\u003eThis handy little square of polarized film will drastically improve your backlit DMG. Instead of having to painstakingly peel the foil backing off of the old film, then having to deal with either removing the adhesive or having your finished product look unprofessional, you can simply tear everything off and replace it with this! It makes what is arguably the hardest part of backlighting your DMG extremely easy and practically fool proof.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe film is non-adhesive, meaning you won't have to worry about air bubbles when placing it behind the LCD, either.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe film is neutral grey, meaning your backlight will look extremely crisp, and, even more, these were specifically cut to 2\" squares (instead of 2\" x 1.875\", the actual size of your LCD,) so you can rotate the film 90 degrees to invert your LCD!\u003cbr\u003e\r\n\u003cbr\u003e\r\nWant to purchase everything you need for backlighting in one simple kit? Go\u003ca href=\"http:\/\/www.nonelectronics.com\/catalog\/index.php?main_page=product_info\u0026amp;cPath=10\u0026amp;products_id=87\"\u003e here\u003c\/a\u003e.\u003c\/p\u003e\r\n"}

Hex DMG Biversion Kit

$9.98

Quick View {"id":864055165043,"title":"Hex DMG Biversion Kit","handle":"hex-dmg-biversion-kit","description":"\u003cp\u003eThis is a simple break out board for a dual inverter IC. This can be used to bivert your Original Game Boy (DMG).\u003c\/p\u003e\r\n\r\n\u003cp\u003eBiversion gives you much sharper contrast for your backlit LCD. It will however be more difficult to see in full daylight.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis kit measures 13mm x 8mm wide and 3mm tall, and includes\u003cspan style=\"line-height: 1.6em;\"\u003e 4 pins and 2 wires for installation. \u003c\/span\u003e\u003c\/p\u003e\r\n","published_at":"2018-05-28T15:50:59-05:00","created_at":"2018-05-28T15:51:03-05:00","vendor":"Nonfinite Electronics","type":"","tags":["biversion","Game Boy mods","hex inverters"],"price":998,"price_min":998,"price_max":998,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536764280947,"title":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","option1":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","option2":null,"option3":null,"sku":"HEXDMGv12-yes-please-i-need-one-to-open-my-game-boy-1-off-original-price-orig-299-each","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hex DMG Biversion Kit - Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","public_title":"Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)","options":["Yes please, I need one to open my Game Boy! ($1 off original price! Orig. $2.99 each)"],"price":998,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGv1.2-01.jpg?v=1527540663","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGInstallationGuide.jpg?v=1527540663","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGv1.2-02.jpg?v=1527540663","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGv1.2-01_52d7a0f1-e8e7-4635-b5a3-833ac688b728.jpg?v=1527540663","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGv1.2-03.jpg?v=1527540663"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/HexDMGv1.2-01.jpg?v=1527540663","options":["Add a Tri-Wing Screwdriver"],"content":"\u003cp\u003eThis is a simple break out board for a dual inverter IC. This can be used to bivert your Original Game Boy (DMG).\u003c\/p\u003e\r\n\r\n\u003cp\u003eBiversion gives you much sharper contrast for your backlit LCD. It will however be more difficult to see in full daylight.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis kit measures 13mm x 8mm wide and 3mm tall, and includes\u003cspan style=\"line-height: 1.6em;\"\u003e 4 pins and 2 wires for installation. \u003c\/span\u003e\u003c\/p\u003e\r\n"}

V4 ENVY Backlight for DMG or Pocket

$7.99

Quick View {"id":864057720947,"title":"V4 ENVY Backlight for DMG or Pocket","handle":"v4-envy-backlight-for-dmg-or-pocket","description":"\u003cp\u003eV4 (Affectionately codenamed Envy) backlights feature 4 LEDs and fit easily under your Game Boy's LCD. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003eThe size fits easily inside DMG and Pocket LCD housings with no cutting required, and the LEDs are bright and vibrant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Times New Roman', serif; font-size: 14.6666669845581px; line-height: 20.7999992370605px;\"\u003eEach kit includes the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: 'Times New Roman', serif; font-size: 14.6666669845581px; line-height: 20.7999992370605px;\"\u003e1 V4 Backlight\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e1 Piece of non-adhesive polarized film -\u003cstrong\u003e This film makes it possible for any backlight to become either inverted or standard. \u003c\/strong\u003e$4.99 value, included free.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e1 carbon film resistor - 68 Ohm for White, Green, and Blue, 47 Ohm for Yellow, Magenta, and Red.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtremely limited stock \u003c\/strong\u003e- Once these are gone, they're gone!\u003c\/p\u003e\n\u003cp\u003e\u003cem style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003eNote: Backlights cannot be installed into GB Colors.\u003c\/em\u003e\u003c\/p\u003e","published_at":"2018-05-28T15:51:38-05:00","created_at":"2018-05-28T15:51:41-05:00","vendor":"Nonfinite Electronics","type":"","tags":["backlight","Game Boy"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536787021939,"title":"Magenta","option1":"Magenta","option2":null,"option3":null,"sku":"NONELEC-V4BACKLIGHT-magenta","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"V4 ENVY Backlight for DMG or Pocket - Magenta","public_title":"Magenta","options":["Magenta"],"price":799,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/GreenInverted.jpg?v=1527540701","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/RedNormal2.jpg?v=1527540701","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/GreenInverted_d9210ba0-19f8-4d68-b3cf-ac0cb089c97c.jpg?v=1527540701","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/V4_20Envy_20Backlight_20-_20Pocket.jpg?v=1527540701"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/GreenInverted.jpg?v=1527540701","options":["Backlight Color"],"content":"\u003cp\u003eV4 (Affectionately codenamed Envy) backlights feature 4 LEDs and fit easily under your Game Boy's LCD. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003eThe size fits easily inside DMG and Pocket LCD housings with no cutting required, and the LEDs are bright and vibrant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Times New Roman', serif; font-size: 14.6666669845581px; line-height: 20.7999992370605px;\"\u003eEach kit includes the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: 'Times New Roman', serif; font-size: 14.6666669845581px; line-height: 20.7999992370605px;\"\u003e1 V4 Backlight\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e1 Piece of non-adhesive polarized film -\u003cstrong\u003e This film makes it possible for any backlight to become either inverted or standard. \u003c\/strong\u003e$4.99 value, included free.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e1 carbon film resistor - 68 Ohm for White, Green, and Blue, 47 Ohm for Yellow, Magenta, and Red.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtremely limited stock \u003c\/strong\u003e- Once these are gone, they're gone!\u003c\/p\u003e\n\u003cp\u003e\u003cem style=\"font-size: 13px; line-height: 20.7999992370605px;\"\u003eNote: Backlights cannot be installed into GB Colors.\u003c\/em\u003e\u003c\/p\u003e"}

Glass DMG Screens

$4.79

Quick View {"id":864054804595,"title":"Glass DMG Screens","handle":"glass-dmg-screens","description":"\u003cp\u003eHigh quality, new glass screen to protect your LCD and replace the original plastic screen protector. Comes in a variety of colors. All models except clear have an adhesive backing. For clear version use of LOCA is recommended. All models ship with protective film attached.\u003c\/p\u003e","published_at":"2018-05-28T15:50:52-05:00","created_at":"2018-05-28T15:50:55-05:00","vendor":"Nonfinite Electronics","type":"","tags":["Glass DMG Screens"],"price":479,"price_min":479,"price_max":479,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536759562355,"title":"Classic","option1":"Classic","option2":null,"option3":null,"sku":"DMG-Screen-Glass-classic","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Glass DMG Screens - Classic","public_title":"Classic","options":["Classic"],"price":479,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""},{"id":9536759595123,"title":"Play It Loud \/ Black","option1":"Play It Loud \/ Black","option2":null,"option3":null,"sku":"DMG-Screen-Glass-play-it-loud-black","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Glass DMG Screens - Play It Loud \/ Black","public_title":"Play It Loud \/ Black","options":["Play It Loud \/ Black"],"price":479,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""},{"id":9536759627891,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DMG-Screen-Glass-white","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Glass DMG Screens - White","public_title":"White","options":["White"],"price":479,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""},{"id":9536759660659,"title":"True Clear","option1":"True Clear","option2":null,"option3":null,"sku":"DMG-Screen-Glass-true-clear","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Glass DMG Screens - True Clear","public_title":"True Clear","options":["True Clear"],"price":479,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/IMG_3727.jpg?v=1527540655","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/IMG_3746.jpg?v=1527540655","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/IMG_3745.jpg?v=1527540655","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/IMG_3732.jpg?v=1527540655"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/IMG_3727.jpg?v=1527540655","options":["Glass Screen Color"],"content":"\u003cp\u003eHigh quality, new glass screen to protect your LCD and replace the original plastic screen protector. Comes in a variety of colors. All models except clear have an adhesive backing. For clear version use of LOCA is recommended. All models ship with protective film attached.\u003c\/p\u003e"}

V5 Backlight for GameBoy Pockets

$7.99

Quick View {"id":864057950323,"title":"V5 Backlight for GameBoy Pockets","handle":"v5-backlight-for-gameboy-pockets","description":"\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e\u003cspan style=\"font-weight: normal;\"\u003eAll V5 \u003c\/span\u003e\u003c\/span\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e\u003cspan style=\"font-weight: normal;\"\u003ebacklight kits include the following:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Backlight of your choosing.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Varia5uit mod – pre-modified 100 ohm trim pot, can be optionally added to your backlight to easily control brightness. ($2.99 value, included free.)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Piece of non-adhesive polarized film - \u003cstrong\u003eUsed to switch the inversion of your backlight should you wish to do so. This film makes it possible for any backlight to become either inverted or standard. \u003c\/strong\u003e$4.99 value, included free.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.6em;\"\u003eThe V5 backlight fits easily inside LCD housings with absolutely no cutting required, and the LEDs are bright and vibrant. This version is optimized for 100% ease of installation into your GameBoy - just peel your screen, snap the backlight in, solder, and you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/JUnTF3pXOEk\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: Backlights cannot be installed into GB Colors.\u003c\/em\u003e\u003c\/p\u003e","published_at":"2018-05-28T15:51:41-05:00","created_at":"2018-05-28T15:51:45-05:00","vendor":"Nonfinite Electronics","type":"","tags":["backlight","led","pocket","v5"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9536789545075,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"V5 Backlight for GameBoy Pockets","public_title":null,"options":["Default Title"],"price":799,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/1544556_971109174388_4213851119079987305_n_20_281_29.jpg?v=1527540705","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/v5rainbow_final.jpg?v=1527540705","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/1544556_971109174388_4213851119079987305_n_20_281_29_b2d7a053-9ee3-4488-b7dc-04123c99f3c1.jpg?v=1527540705","\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/V58BitAesthetics.jpg?v=1527540705"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4565\/3619\/products\/1544556_971109174388_4213851119079987305_n_20_281_29.jpg?v=1527540705","options":["Title"],"content":"\u003cp style=\"margin-bottom: 0in;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e\u003cspan style=\"font-weight: normal;\"\u003eAll V5 \u003c\/span\u003e\u003c\/span\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e\u003cspan style=\"font-weight: normal;\"\u003ebacklight kits include the following:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Backlight of your choosing.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Varia5uit mod – pre-modified 100 ohm trim pot, can be optionally added to your backlight to easily control brightness. ($2.99 value, included free.)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp style=\"margin-bottom: 0in; font-weight: normal;\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003e1 Piece of non-adhesive polarized film - \u003cstrong\u003eUsed to switch the inversion of your backlight should you wish to do so. This film makes it possible for any backlight to become either inverted or standard. \u003c\/strong\u003e$4.99 value, included free.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.6em;\"\u003eThe V5 backlight fits easily inside LCD housings with absolutely no cutting required, and the LEDs are bright and vibrant. This version is optimized for 100% ease of installation into your GameBoy - just peel your screen, snap the backlight in, solder, and you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/JUnTF3pXOEk\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: Backlights cannot be installed into GB Colors.\u003c\/em\u003e\u003c\/p\u003e"}

Pocket Replacement Screen

$3.49

Quick View

Features	___product_label_sale___ ___product_label_new___ ___product_title___ ___product_old_price______product_price___ Availability ___product_availability___ View
Availability	___product_availability___
Options	___product_options___
Vendor	___product_vendor___
Collection	___product_collection___
Rating	___product_rating___

V6 Backlight for Game Boy DMG and Pocket

Related Products

Categories

Latest Products

Featured Products

On-Sale Products

Popular Accessories

INFORMATION

CUSTOMER CARE

EXTRAS

___product_title___

V6 Backlight for Game Boy DMG and Pocket

Related Products

Categories

Latest Products

Featured Products

On-Sale Products

Popular Accessories

Sign up & get